Herringbone Wall Tile | White with Dark Grey Grout


$29.00

Herringbone Wall Tile | White with Dark Grey Grout

Dirty laundry tiles

QUALITY


$29.00
4-Pack | 30.5cm x 30.5cm x 2mm thick

Do you need to wash that look right out of your home?

The laundry room is one of the most overlooked rooms in the home but do you know that we spend 2 hours a week doing our laundry! That’s over 100 hours a year! So let’s make your laundry room clean and fresh with the peel and stick white herringbone tiles with dark grey grout. A perfect combination of design and practicality which are easy to wipe clean and moisture-proof.

These vinyl tiles are not just designed for laundry rooms they can also be used in kitchens, bathrooms and cloakrooms. The extra thick 2mm herringbone tiles make for a quick and easy installation that can be completed in just a few hours! What are you waiting for? Clean up your look with the Peel and Stick Hub! 

MULTIBUY OFFER on all full priced wall tiles

3+ packs 5% OFF
5+ packs 7% OFF
8+ packs 9% OFF

Discount deducted at checkout!

Wall Tile Calculator

Use our clever tile calculator and remove the guessing game of how many packs you require for your DIY project. Just follow these easy steps:

  • Divide the area you want to cover in rectangular sections as pictured. Make all measurements in mm.
  • We recommend to add a minimum of 10% wastage to your order. Select your wastage from the drop down menu. As a rule of thumb larger tiles and a more geometric look (e.g. the herringbone tiles that interlocks both horizontally and vertically) require a higher waste percentage.
  • The calculator base the calculations on the tiles being applied in the direction as pictured of the hand holding the tile. If you intend to position your tiles in the opposite direction, simply swap width with height.

Section A
Width mm
Height mm
Section B (Optional)
Width mm
Height mm
Section C (Optional)
Width mm
Height mm
Section D (Optional)
Width mm
Height mm
Add Wastage (recommended)
Wastage
Are you ready for some Dirty laundry tiles?
Packs
Here is the Tile-tastic Tally
You need 0 x 4-packs (0 sheets) to cover 0.0 m2 with no wastage

Phew! That number crunching was an exhausting exercise. (We hope we got it right!!)

Now it's up to you mate. You get the easy part and all you need to do is just to stick them to your wall (with the guidance of our awesome instructions of course).

Boring but required facts | 2mm Quality Tiles:

  • We always say if you are going to do a job well then it’s worth doing it properly! And at the Peel & Stick Hub we have designed our wall tile packs to give you just the right amount of tiles for your job. On average most jobs require a couple of packs of tiles so bare in mind that our packs contain 4 sheets of tiles. 
  • You may be wondering how you calculate how many packs of tiles you need. Don’t stress it, our handy calculator above is designed to quickly find out approximately how many tiles your project requires. Of course you still need to measure the surface you intend to cover in mm but this should really help and make the buying process easy! Plus we have some super saver bundles so make sure you check these out!
  • When it comes to installation - don’t be a ‘know it all’. Read our full installation guide here. If you skip this step your project may not look top notch and you certainly won’t give us a 5 star review that we so desperately want. Do us both a favour and check out the guide!
  • One of the positives to our wall tiles is that they are easy to install as they are  self-adhesive. For anyone wondering, this means they have a sticky back and can just be stuck to a wall. That’s right; peel off the backing paper and stick them to your wall like a jigsaw puzzle. No extra glue is required and definitely no grout or tradesmen. The tiles can be installed by you or by any friend or family member you wish to bribe.
  • The tiles are 30.5cm x 30.5cm and a whopping 2mm thick! That is thicker than any other low budget peel and stick tile on the market. Why so thick? Because they hide imperfections better! 
  • The tiles are hard wearing and scratch resistant and if we're getting technical they are made with a PET substrate. Wait, PET what? - It just means that these tiles won’t turn yellow from the sun or be scratched from cleaning. They’ll stay up until the day you decide you want to jump on the next trend. As an added bonus; the backing paper is degradable.

Happy peel and sticking!

More Info - 2mm Quality Tiles

suitable surfaces

  • Tiles
  • Painted Walls
  • Melamine
  • Stainless Steel
  • Glass
  • Acrylic

specifications

Size: 30.5cm (W) x 30.5cm (H) x 2mm (T)

4 sheets of self-adhesive wall tiles

Material: Peeling back sheet, Premium EVA foam adhesive tape, Image printing PET substrate, scratch resistant PET substrate

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Installation Guide

Clean: Clean the area you wish to renovate with a degreaser and let dry.

Measure: Measure the area you are tiling correctly and mark guidelines on the wall ready for installation.

Cut: Mark the backing paper of the tiles using a ruler and pencil, then cut using a craft knife.

Peel: Remove a small section of the paper backing and align the tile on the wall. Once in place remove the remainder of the backing.

Stick & Interlock: You will need to butt join the tiles like a jigsaw puzzle. Once in place, press the tiles down firmly allowing the glue to bond with the surface.

For optimal installation see our full FAQs and How to Install guide.

American Express Apple Pay Google Pay Mastercard Visa Afterpay Shop Pay