Installation Guide
Clean: Clean the area you wish to renovate with a degreaser and let dry.
Measure: Measure the area you are tiling correctly and mark guidelines on the wall ready for installation.
Cut: Mark the backing paper of the tiles using a ruler and pencil, then cut using a craft knife.
Peel: Remove a small section of the paper backing and align the tile on the wall. Once in place remove the remainder of the backing.
Stick & Interlock: You will need to butt join the tiles like a jigsaw puzzle. Once in place, press the tiles down firmly allowing the glue to bond with the surface. Remove the transparent protective film.
For optimal installation see our full FAQs and How to Install guide.