Frame your project like a professional
Installation Guide for Edge Trims
Unroll: The edge trim has a natural bend. Before you start, roll the edge trim in the opposite direction from how it's been packaged to offset its tension a bit. This will help the strip to stick properly.
Cut: Cut the edge trim at a 45° angle to make a neat corner.
Peel: Peel off the protective tape from the back of the edge trim. Make sure you only remove the red tape and not the white adhesive foam. For longer lengths keep the majority of the backing paper on and only fold back a small part of it.
Stick: Press the edge trim firmly onto the wall to make sure proper adhesion. Remove the remaining of the backing paper as you smooth down the rest of the edge trim
